Pre-Approved Improvements

View PDF

Approved May 18, 2016

Evergreen Community Association
ARC Pre-Approved Improvements

Certain exterior improvements may be made to an Owner’s unit without obtaining prior written approval from the Architectural Review Committee (ARC), if the Owner submits the ARC form showing that the modification is being installed in accordance with the guidelines as listed below.

Owners must still complete and submit the ARC form to the Board of Directors, prior to making the modifications. Once this form has been
submitted to the Board of Directors, the Owner may proceed with the work. This pre-approval is entirely based on the precondition that the Owner shall comply with the Association’s Architectural Guidelines. In the event the Owner fails to comply, the Association may require the Owner to make the necessary corrections to bring the improvement into compliance or to restore it to the original condition. Changes or corrections will be done at the Owner’s sole cost and expense.

Air Conditioning – Replacement of exterior condensers are to be placed on the side of the house in the same location as the original unit. Specifications should be a similar size and rating. Window A/C units are not permitted.

Flag Pole Mounts – One mount is permitted per residence. Size should be
suitable for a pole that does not exceed six feet in length. Color shall match the surface upon which the mount is located. The highest point of Flag Poles shall be below the roof line of the residence.

Garage Remote Entry Pads – One remote is permitted per residence. The pad
shall be located only on wood trim of the garage. Color shall match the trim as closely as possible.

Gates – Rear gate specifications shall match the design, size, and materials of
the wood gate as originally installed by the Builder. Color shall match the
residence trim code. Front gates shall be metal, vertical stake, flat top, painted black, and limited to the height of the entry wall. Gates are not to be attached to the block wall. Temporary gates, screens, or partitions are not permitted.

Screen Doors – Only “vanishing” type screen doors are permitted. Color of frame shall match the door trim code as closely as possible.